Ashly 4.24C manual Front Panel Control Features, 4 x 2-wayCrossover, Presets, Input Select

Operating Manual - PROTEA SYSTEM II 4.24C Crossover / System Processor

4. FRONT PANEL CONTROL FEATURES

4.1 Function Keys and Data Wheel

To the right of the LCD display	24 Bit Digital Crossover	System Processor
are two unlabeled function keys and a			Esc
rotary data wheel. All audio and sys-	Preset 01

tem parameters are edited using these	4 x 2-way Crossover
three controls. Each of the two lines of
text on the LCD display correspond to
a dedicated function key, so that vari-
ous tasks on both lines may be selected

using their respective keys. The selected task is highlighted by a flashing underscore beneath the word or number, and the parameter is then adjusted up or down with the data wheel. The Esc key will exit any activity and return to the top level showing the preset number and name.

4.2 Presets

The 4.24C is organized into 30 programmable presets, each completely defining the configuration of all four inputs and eight outputs along with their respective audio components. There are ten repeating preset configurations pre-loaded into the 4.24C which are simply starting points for common applications, and all can be modified, re- named, and saved to suit the end user. Please Note: In addition to the 30 preset numbers, a constantly refreshed Working Preset is used to take a "snapshot" of all current settings should the unit be turned off before changes can be saved.

When the 4.24C is first powered up, the last working preset is loaded, displaying the number and name last used before the unit was turned off. Any modifications made to that preset before saving it will remain in the working preset until either the modified preset is saved, or a fresh preset is recalled to the 4.24C. When modifications to an existing preset are made without saving, the display adds the text ￿modified￿￿after the preset number.

4.3 Input Select

There are four audio inputs to the 4.24C, and each input is processed indepen- dently and may be routed to one or several outputs. Select an input to edit its Gain, EQ, and Delay settings, or to mute it. Signal routing occurs in the output section.

4.4 Output Select

There are eight outputs to the 4.24C, and each output can obtain its source from any input, several combinations of inputs, or no input (off). Select an output channel to edit its Source, Gain, Polarity, EQ, Delay, Crossover, or Limiter functions.

Clip +10 0

-10

-20/ Mute

A B C D

Input Select

4.5 LED Indicators

Each input and output has a five segment LED array for audio level display, ranging from -20 through clip- ping. The -20 LED is two-color, also serving as the Mute indicator by turn- ing red. The meter scale is factory set so that 0 on the meter is 0dBu (0.775Vrms), however it can be eas- ily changed to VU scale (0 = +4dBu, or 1.228Vrms) within the Util menu.

Gain	Recall				Clip
					Lim
EQ	Save				0
					-10
Delay	Copy				-20/
					Mute
Xover	Mute
	1	2	3	4	5	6	7	8
Limit	Util			Output Select

5