12
Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but-
ton to extend the elevator foot.
Rotate the leveling foot (located at the bottom back right corner), if ne ces-
sary.
Position the projector the desired distance from the screen at a 90 degree
angle to the screen.
See page42 for a table listing screen sizes and distances.
Adjust the zoom or focus rings by rotating them until the desired image size
and focus are produced.
If the image is not square, adjust the vertical digital keystone by using the
buttons on the keypad.
Press the upper Keyston e button to reduce the upper part of the image, and
press the lower Keyston e button to reduce the lower part.
You can also adjust the horizontal keystone of the C180 via the menus, or se t
the projector to automatically adjust the vertical keystone. See page30.
Adjust the Contrast or Brightness in the Picture menu.
See page29 for help with the menus.
computer2network
monitorout
audioout
audioin
L
audioin
serialcontrol
computerin
computer1
video2
videoin
RS-video1
adjust height
rotate
leveling
foot
elevator
foot
release button
computer2network
monitorout
audioout
audioin
L
audioin
serialcontrol
computerin
computer1
video2
videoin
RS-video1
adjust distance
adjust zoom and focus
focus
zoom
adjust keystone
computer2network
monitorout
audioout
audioin
L
audioin
serialcontrol
computerin
computer1
video2
videoin
RS-video1
adjust Contrast or Brightness
contrast
brightness