TECHNICAL DATA
TECHNISCHE DATEN CARACTERISTIQUES TECHNIQUES DATOS TÉ CNICOS DATI TECNICI TEKNISKE DATA
CONNECTORS |
| ANSCHLÜSSE | CONNECTEURS | CONECTORES | CONNETORI | KONTAKTER |
|
| ||||||||
2 | 1 | 1 |
| 2 | 15 | 11 | 15 | 11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
| 3 | 4 | 5 | 10 | 6 | 10 | 6 |
|
|
|
|
|
| 4 | 3 |
3 | 4 | 6 | 7 | 8 | 5 | 1 | 5 | 1 |
|
|
|
|
|
| 2 | 1 |
USB MOUSE 2 |
| MOUSE 1 |
| COMPUTER | MONITOR | COMP IN |
| AUDIO | VIDEO IN | VIDEO | ||||||
|
| LINE OUT | ||||||||||||||
DIGITAL | 8 PIN MINIDIN | 15 HIGH DENSITY DSUB | 15 HIGH DENSITY DSUB | 3.5 mm |
|
| 3.5 mm |
| 4 PIN MINIDIN | |||||||
USB |
| FEMALE |
|
| FEMALE |
| FEMALE | JACK |
|
| JACK |
| FEMALE | |||
1 VCC | 1 | Mac ADB |
| 1 | Analog R IN | 1 | Analog R OUT | TIP: right |
|
| TIP: right |
| 1 | GND | ||
2 - Data | 2 | PS/2 clock |
| 2 | Analog G IN | 2 | Analog G OUT | RING: left |
|
| RING: left |
| 2 | GND | ||
3 +Data | 3 | PS/2 data |
| 3 | Analog B IN | 3 | Analog B OUT | STEM: common | STEM: common | 3 | Luma | |||||
4 GND | 4 | RS232 TXD | 4 | AGND | 4 | Reserved |
|
|
|
|
| 4 | Common | |||
|
| 5 | Not used |
| 5 | AGND | 5 | AGND |
|
|
|
|
|
|
|
|
|
| 6 | RS 232 RXD | 6 | Analog R GND IN | 6 | Analog R GND OUT |
|
| 3.5 mm |
| PHONO/RCA |
|
| ||
|
| 7 | RS 232 CTS | 7 | Analog G GND IN | 7 | Analog G GND OUT |
|
| JACK |
| FEMALE |
|
|
| |
|
| 8 | GND |
| 8 | Analog B GND IN | 8 | Analog B GND OUT |
|
| TIP: right | STEM: composite |
|
| ||
|
|
|
|
| 9 | Reserved | 9 | Reserved |
|
|
|
| ||||
|
|
|
|
|
|
| RING: left |
| SHIELD: GND |
|
| |||||
|
|
|
|
| 10 | Sync GND IN | 10 | Sync GND OUT |
|
|
|
|
| |||
|
|
|
|
|
| STEM: common |
|
|
|
| ||||||
|
|
|
|
| 11 | AGND | 11 | Not used |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
| 12 | DDC/SDA | 12 | DDC/SDA |
|
|
|
|
|
|
|
|
|
|
|
|
| 13 | HSync IN | 13 | HSync OUT |
|
|
|
|
|
|
|
|
|
|
|
|
| 14 | VSync IN | 14 | VSync OUT |
|
|
|
|
|
|
|
|
|
|
|
|
| 15 | DDC/SCL | 15 | DDC/SCL |
|
|
|
|
|
|
|
|
L FCC STATEMENT
ing device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer input/output
devices, terminals, printers, etc.) certified to comply with the Class A limits may be attached to a computer that complies with Class A limits. When connecting to a peripheral device, a shielded input/output cable is required to ensure compliance with FCC rules. The shielded cable that must be used is supplied with the equipment. Operation with
,if not installed and used in accordance with the instruction manual, may cause interference to radio
and television reception. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of the FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
∙Reorient the receiving antenna.
∙Relocate the projector with respect to the receiver.
∙Plug the equipment to a different outlet so that equipment and receiver are on different branch circuits.
∙Fasten cables using mounting screws to ensure adequate EMI control.
nications Commission (FCC): "How to identify and resolve radio and TV interference problems",
available from the U.S. Government Printing Office, Washington, DC 20402, Stock No.
C2 COMPACT / C6 COMPACT | 20 | www.askproxima.com |