Asoka® User’s Guide

PlugLink 9950 Cable/ DSL Router PL9950-BBR

2.Selecting your Internet Service Provider (ISP) Connection Type to Static IP: A static IP address connection type is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address, subnet mask, and ISP gateway address. This information is available from your ISP or on the paperwork that your ISP left with you. Type in your information. Click Apply.

Figure 8-3: Static IP Screen

3.Selecting your Internet Service Provider (ISP) Connection Type to PPPoE: Most DSL providers use PPPoE as the connection type. If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into the service. If you have an Internet connection that doesn’t require a modem, you may also use PPPoE. Type in your information and click Apply.

Figure 8-4: PPPoE IP Screen

Setting Domain Name Server (DNS) Information

After you have selected and configured your connection type, you will need to set the DNS Server information.

1.Under the WAN sub menu, click on DNS.

2.Enter the DNS information provided to you by your ISP and click Apply.

Page 16 of 43