Asoka PL9950-BBR Restoring Factory Default Settings

Asoka® User’s Guide

PlugLink 9950 Cable/ DSL Router PL9950-BBR

Figure 11-5: System Reboot Confirmation Popup

5.The Reset Device Successfully screen will appear as shown in figure 11-6. Rebooting the PL9950-BBR Router can take up to 60 seconds. It is important not to turn off the power or unplug the PL9950-BBR Router during the reboot.

Figure 11-6: System Reboot Status Screen

6.When the PL9950-BBR reboots, the home page should appear automatically. If not, type in the PL9950-BBR Router’s address (default = 192.168.1.1) into the address or navigation bar of your web browser.

Restoring Factory Default Settings

Using this option will restore all of the settings in the PL9950-BBR Router to the factory default settings. It is recommended that you back up your settings prior to restoring to factory default settings. To restore factory default settings, follow these instructions:

1.Click on System in the top menu.

2.Click on Restore Defaults in the right menu.

3.Click the Factory Default button.

Page 34 of 43