Asoka PL9950-BBR Configuring Static/ Dynamic Routing, Enabling the Demilitarized Zone (DMZ)

Asoka® User’s Guide

PlugLink 9950 Cable/ DSL Router PL9950-BBR

Figure 10-8: Port Triggering Settings Page

Enabling the Demilitarized Zone (DMZ)

The DMZ feature allows you to specify one computer on your network to be placed outside the firewall. This may be necessary if the firewall is causing problems with an application such as a game or video conferencing application. Use this feature on a temporary basis. The computer in the DMZ is NOT protected from hacker attacks.

To put a computer in the DMZ, click on DMZ under NAT in the Sub Menu.

1.Enter the IP address in the IP field

2.Check the box next to Enable

3.Click Apply

Figure 10-9: DMZ Settings Page

Configuring Static/ Dynamic Routing

The PL9950-BBR allows you to set the static routing function and dynamic routing feature.

Static routing function determines the path that data follows over the network before and after it passes through the router. You can use static routing to allow different IP domain users to access the Internet through this device.

Page 27 of 43