Power Management
The Power Management menu lets you configure your system to most effectively save energy while operating in a manner consistent with your own style of computer use. The following screen shows the Power Management parameters and their default settings:
CMOS Setup Utiliyt – Copyright (c)
Power Management Setup
ACPI Aware O/S | Yes |
ACPI Suspend Mode | S3 (STR) |
Power On by RTC Alarm | Disabled |
Power On by PCIE Devices | Enabled |
Power On by PCI Devices | Enabled |
Power On by Modem Ring | Enabled |
Wake Up by PS/2 KB/Mouse | Enabled |
Wake Up by USB KB//Mouse | Enabled |
Restore On AC Power Loss | Last State |
|
|
Item Help
Enable / Disable
ACPI support for
Operating System.
ENABLE: If OS supports ACPI.
DISABLE: If OS does not support ACPI.
KLIJ: | Move Enter: Select | F10: Save ESC: Exit | |
F1: | General Help | F9: Load Default Settings | |
The following table describes the parameters found in this menu.
Parameter | Description | Options |
ACPI Aware O/S | Control wake up event for | No/Yes |
| S1/S3/S4/S5 |
|
ACPI Suspend Mode | S1(POS)/S3 (STR) | |
|
|
|
Power On by RTC Alarm |
| Disabled/Enabled |
|
|
|
Power On by PCIE Devices |
| Disabled/Enabled |
|
|
|
Power On by PCI Devices |
| Disabled/Enabled |
|
|
|
Power On by Modem Ring |
| Disabled/Enabled |
|
|
|
Wake Up by PS/2 KB/Mouse | Control wake up event for | Disabled/Enabled |
| S1/S3 |
|
Wake Up by USB KB//Mouse | Disabled/Enabled | |
|
|
|
28
