ASRock 890GMH/USB3 manual I/O Panel, LAN Port LED Indications, Table for Audio Output Connection

1.4I/O Panel

1 2 3 4

								5			8
										6		9
									7		10
	16	15	14	13	12		11
1	USB 2.0 Ports (USB23)			** 9		Front Speaker (Lime)
2	VGA/D-Sub Port			10		Microphone (Pink)
3	USB 2.0 Ports (USB45)			11		USB 2.0 Port (USB0)
* 4	LAN RJ-45 Port			12		USB 3.0 Port (USB1)
5	Central / Bass (Orange)			13		eSATAII Port (eSATA1)
6	Rear Speaker (Black)			14		VGA/HDMI Port
7	Optical SPDIF Out Port			15		VGA/DVI-D Port
8	Line In (Light Blue)			16		PS/2 Keyboard Port (Purple)

*There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.

LAN Port LED Indications

Activity/Link LED			SPEED LED
Status	Description	Status		Description
Off	No Link	Off		10Mbps connection
Blinking	Data Activity	Orange		100Mbps connection
On	Link	Green		1Gbps connection

ACT/LINK SPEED

LED LED

LAN Port

**If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels	Front Speaker	Rear Speaker	Central / Bass	Line In
	(No. 9)	(No. 6)	(No. 5)	(No. 8)
2	V	--	--	--
4	V	V	--	--
6	V	V	V	--
8	V	V	V	V

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “Mixer” tool on your system.

Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click

“ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio.

1 3