3.3 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.
BIOS SETUP UTILITY
Main OC Tweaker Advanced H/W Monitor Boot Security Exit
CPU Configuration
Overclock Mode | [Auto] | |
CPU Frequency (MHz) | [400] |
|
PCIE Frequency (MHz) | [100] |
|
Spread Spectrum | [Auto] | |
Boot Failure Guard | [Enabled] | |
Boot Failure Guard Count | [3] |
|
Advanced Clock Calibration | [Disabled] | |
Processor Maximum Frequency | x31.5 6300 MHZ | |
North Bridge Maximum Frequency | x31.0 6200 MHz | |
Processor Maximum Voltage | 1.5500 V | |
Multiplier/Voltage Change | [Auto] | |
HT Bus Speed | [Auto] | |
HT Bus Width | [Auto] | |
Memory Configuration |
|
|
|
|
|
Memory Clock | [Auto] |
Overclocking may cause damage to your CPU and motherboard.
It should be done at your own risk and expense.
| Select Screen |
| Select Item |
Enter | Go to Sub Screen |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
CPU Configuration
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configuration options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Opti- mized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options: [Disabled] and [Enabled].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
Advanced Clock Calibration
This allows you to adjust Advanced Clock Calibration feature. The default valueis [Disabled]. Configuration options: [Disabled], [Auto], [All Cores] and [PerCore]. If you select [All Cores], you will see the option “Value (All Cores)”.Configuration options: [+12%] to
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
34