North Bridge Maximum Frequency
It will display North Bridge Maximum Frequency for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of Processor Frequency and Processor Voltage. However, it is recommended to keep the default value for system stability.
BIOS SETUP UTILITY
Main OC Tweaker Advanced H/W Monitor Boot Security Exit
CPU Configuration
Overclock Mode | [Auto] | |
CPU Frequency (MHz) | [400] |
|
PCIE Frequency (MHz) | [100] |
|
Spread Spectrum | [Auto] | |
Boot Failure Guard | [Enabled] | |
Boot Failure Guard Count | [3] |
|
Advanced Clock Calibration | [Disabled] | |
Processor Maximum Frequency | x31.5 6300 MHZ | |
North Bridge Maximum Frequency | x31.0 6200 MHz | |
Processor Maximum Voltage | 1.5500 V | |
Multiplier/Voltage Change | [Manual] | |
HT Bus Speed | [Auto] | |
HT Bus Width | [Auto] | |
Memory Configuration |
|
|
|
|
|
Memory Clock | [Auto] |
Overclocking may cause damage to your CPU and motherboard.
It should be done at your own risk and expense.
| Select Screen |
| Select Item |
Enter | Go to Sub Screen |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of this item.
Processor Voltage
It allows you to adjust the value of processor voltage. However, for safety and system stability, it is not recommended to adjust the value of this item.
NB Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of this item.
HT Bus Speed
This feature allows you selecting
HT Bus Width
This feature allows you selecting
Memory Configuration
Memory Clock
This item can be set by the code using [Auto]. You can set one of the standard values as listed for DDR2 memory modules: [200MHz DDR2_400], [266MHz DDR2_533], [333MHz DDR2_667] and [400MHz DDR2_800]. If you adopt Phenom CPU, there is one more option: [533MHz DDR2_1066].
35