2.5 Multi Monitor Feature
This motherboard supports multi monitor feature. With the internal VGA output support and the external
Please refer to the following steps to set up a surround display environment:
1.Install the ATITM PCI Express VGA cards on PCIE2 slot. Please refer to page 14 for proper expansion card installation procedures for details.
2.Connect
VGA port
3.Boot your system. Press <F2> to enter BIOS setup. Enter “Share Memory” option to adjust the memory capability to [32MB], [64MB], [128MB] [256MB] or [512MB] to enable the function of VGA. Please make sure that the value
you select is less than the total capability of the system memory. If you do not adjust the BIOS setup, the default value of “Share Memory”, [Auto], will disable VGA function when the
4.Install the onboard VGA driver and the
5.Set up a
For Windows® XP / XP 64-bit OS:
Right click the desktop, choose “Properties”, and select the “Settings” tab so that you can adjust the parameters of the
A.Click the “Identify” button to display a large number on each monitor.
B.
C.Select the display icon identified by the number 2.
D.Click “Extend my Windows desktop onto this monitor”.
1 5
English
ASRock