ASRock 960GM-S3 FX USB 2.0 Headers Besides four default USB, Two USB 2.0 headers on this, Ports

USB 2.0 Headers	Besides four default USB 2.0
(9-pin USB6_7)	ports on the I/O panel, there are
(see p.2 No. 19)	two USB 2.0 headers on this
	motherboard. Each USB 2.0
	header can support two USB
	2.0 ports.
(9-pin USB4_5)
(see p.2 No. 18)

Print Port Header	This is an interface for print
(25-pin LPT1)	port cable that allows
(see p.2 No. 22)	convenient connection of printer
	devices.

Front Panel Audio Header	This is an interface for the front
(9-pin HD_AUDIO1)	panel audio cable that allows
(see p.2, No. 23)	convenient connection and
	control of audio devices.

1.High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system.

2.If you use AC’97 audio panel, please install it to the front panel audio header as below:

A.Connect Mic_IN (MIC) to MIC2_L.

B.Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C.Connect Ground (GND) to Ground (GND).

D.MIC_RET and OUT_RET are for HD audio panel only. You don’t need to connect them for AC’97 audio panel.

E.To activate the front mic.

For Windows® XP / XP 64-bit OS:

Select “Mixer”. Select “Recorder”. Then click “FrontMic”. For Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS:

Go to the "FrontMic" Tab in the Realtek Control panel. Adjust “Recording Volume”.

English

1 9

ASRock 960GM-GS3 FX / 960GM-S3 FX Motherboard