![](/images/backgrounds/293819/asrock-k7s41gx2-owner-s-manual27x1.png)
3.4.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
CPU Host Frequency | [By Jumper] |
Actual Frequency | [166] |
Spread Spectrum | [Auto] |
Boot Failure Guard | [Enabled] |
Boot Failure Guard Count | [3] |
Over Vcore Voltage | [Normal] |
[Enter] to select how to set the CPU host frequency.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright
CPU Host Frequency
[By Jumper]
It is recommended to select this option, which will let the CPU host frequency of this motherboard determined by the
[Manual]
This allows user to set CPU host frequency manually. However, because the CPU host frequency of this motherboard is determined by the jumper- setting, you must set the FSB jumper adjustment according to your AMD CPU before you use this “Manual” option as the FSB setting in BIOS setup to perform over clocking. This is not recommended unless you thoroughly know the feature. Wrong setup may cause problems during operation.
Actual Frequeny
This is a
Spread Spectrum
This field should always be [Disabled] for better system stability.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
Over Vcore Voltage
This feature allows you to increase the CPU Vcore voltage by 3% or 6%. The default value is [Disabled].
It is not recommended to enable “Over Vcore Voltage” feature. Doing so may cause CPU damage.
2 7