9. Setup
The Setup application contains both default and user defined configurations that determine how a unit operates. Three default configurations are preloaded on the Leica Geosystems GS20 to allow the user to begin data collection immediately. New configurations can be created and default configurations can be modified, but any modifications to a default must be saved under a different name.
9.1Selecting, Modifying and Creating
Configurations
The Setup screen opens to a setup menu that displays the Config Sets, Hardware Management, ID Template Management and Device Management.
9.1.1Selecting
A configuration can be selected by selecting Config Sets and highlighting the table row and pressing Enter. The selection is shown by a filled circle or "radio button".
9.1.2Modifying
If Enter is pressed again on a selected field, Setup will open the configuration for editing. If a Default Configuration is modified, the user will have to 1 Save As via the context menu, or exit dialog on Escaping.
Tip: Changes will not take place until the configuration is saved.
9.1.3Creating
To create a new configuration from the table, select Menu and choose 1 New. A text entry dialog will open requiring a name to be entered and saved. The configuration will then be selected and editable.
)When creating a new configuration, values will be copied from the previously highlighted configuration.
Leica GS20 Field
63
