1.Power on the GS20 and select 8 Setup, 2 Hardware Management and the Bluetooth_Wireless Selection.
2.Expand the Wireless tree, expand the Bluetooth, and view WoRCS.
3.If the GS20 has been linked to the WoRCS Bluetooth Module, an address that corresponds to the address on the top of the Bluetooth Module will appear. If the address does not correspond, press menu and select clear.
4.If the address area displays zeros, you will need to establish a connection.
5.Highlight the WoRCS branch and press enter; this will take you to the Bluetooth Setup screen.
6.Press Inquire and wait until the Cancel button becomes Inquire again.
7.You will see the Available Devices in the choice list. By highlighting the available devices and pressing Enter, you will see the entire list of available bluetooth devices in the choice list. If multiple devices have been found, select the device that matches your WoRCS bluetooth address, displayed on the top of the bluetooth module.
8.Finally, press the Menu key and Save, then Escape back to the main menu.
Tip: Ensure batteries are charged and correctly inserted. Ensure bluetooth module is set to line and on. The single flashing red light indicates that power is available. When the light changes to green a BLUETOOTH connection is established but no data is exchanged. When both green lights are flashing data is exchanged.
Leica GS20 Field
84
Setup
