ASRock K8NF6G-VSTA manual Chipset Configuration

Bank Interleaving

Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention.

3.3.2Chipset Configuration

	BIOS SETUP UTILITY
Advanced
Chipset Settings	To set DRAM Voltage.
Onboard LAN	[Enabled]
Onboard HD Audio	[Auto]
Front Panel Controller	[Auto]
Share Memory	[Auto]
Primary Graphics Adapter	[PCI]
CPU-NB Link Speed	[Auto]
CPU-NB Kink Width	[Auto]
DRAM Voltage	[Auto]	Select Screen
		Select Item
	+ -	Change Option
	F1	General Help
	F9	Load Defaults
	F10	Save and Exit
	ESC	Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

OnBoard LAN

This allows you to enable or disable the onboard LAN feature.

OnBoard HD Audio

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If you select [Auto], the onboard HD Audio will be disabled when PCI Sound Card is plugged.

Front Panel Control

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio Front Panel.

Share Memory

This allows you to set share memory feature. The default value is [Auto]. Configuration options: [Auto], [16MB], [32MB], [64MB], [128MB], and [256MB].

Primary Graphics Adapter

This item will switch the PCI Bus scanning order while searching for video card. It allows you to select the type of Primary VGA in case of multiple video controllers. The default value of this feature is [PCI]. Configuration options: [PCI], [Onboard] and [PCI Express].

CPU - NB Link Speed

This feature allows you selecting CPU to NB link frequency. Configuration options: [Auto], [200 MHz], [400 MHz], [600 MHz], and [800 MHz].

CPU - NB Link Width

This feature allows you selecting CPU to NB link width. Configuration options: [Auto], [8 bit], and [16 bit].

DRAM Voltage

Use this to select DRAM voltage. Configuration options: [Auto], [Ultra High], [High], [Normal], and [Low]. The default value is [Auto].

3 2