ASRock K8NF6G-VSTA manual System Panel Header

F. Enter Windows system. Click the icon on the lower right hand taskbar to enter Realtek HD Audio Manager. Click “Audio I/O”, select

“Connector Settings” , choose “Disable front panel jack detection”, and save the change by clicking “OK”.

System Panel Header

(9-pin PANEL1)

(see p.10 No. 12)

1

PLED+

PLED-

PWRBTN#

GND

DUMMY RESET#

GND HDLED-

HDLED+

This header accommodates several system front panel functions.

Chassis Speaker Header

1

(4-pin SPEAKER 1)

(see p.10 No. 13)

SPEAKER DUMMY

DUMMY +5V

Please connect the chassis speaker to this header.

Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.10 No. 11)	GND
	+12V
	CHA_FAN_SPEED

Please connect a chassis fan cable to this connector and match the black wire to the ground pin.

CPU Fan Connector

(4-pin CPU_FAN1)	FAN_SPEED_CONTROL	4
(see p.10 No. 2)	CPU_FAN_SPEED	3
	+12V	2
	GND	1

Please connect the CPU fan cable to this connector and match the black wire to the ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

	Pin 1-3 Connected
	3-Pin Fan Installation
ATX Power Connector	Please connect an ATX power
(20-pin ATXPWR1)	supply to this connector.
(see p.10 No. 25)
ATX 12V Power Connector	Please note that it is necessary
(4-pin ATX12V1)	to connect a power supply with
(see p.10 No. 8)	ATX 12V plug to this connector.
	Failing to do so will cause power
	up failure.

2 0