Samsung SMT-190Dx Standard Camera composition SOC-C120, Installing Standard CameraSOC-C120

USER'S MANUAL

2-3) Standard Camea composition and installation method

1) Standard Camera composition (SOC-C120)

Attach the camera mount bracket to the wall or ceil- ing using the supplied three screws (M4 X L15). Adjust the camera to target the video location and tighten the bracket handle on the camera mount bracket.

PIN	SPEC
NUMBER
	SPEAKER(HOT)
	VIDEO_OUT
	GND
	SPEAKER(COLD)
	AUDIO_OUT/ALARM_OUT
	18V DC

a.Lens

It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area.

b.Microphone

Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor.

c.Camera fitting groove

Enables the camera to be fixed onto the bracket.

You may install it either above or below the camera if necessary.

d.6-pin modular jack

Used to connect the camera to the monitor.

e.SENSOR jack

Used to connect the sensor to the camera.

f.Speaker

It outputs the sound signal which was transfered from the monitor.

2) Installing Standard Camera(SOC-C120)

SOC-C120 camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-110S).

Choose an installation site that can sufficiently support the weight of the equipments to be installed.

4x15 sized screws

wall or ceiling

3)Camera Mount Bracket(SBR-110S) & Standard Camera(SOC-C120)

(1)Overview

CAMERA MOUNT BRACKET (SBR-110S) is used to attach the camera to a wall, ceiling or shelf.

(2)Specifications

Use : Indoor

Installation : Wall or Ceiling

Dimensions : 57(W) x 47.2(H) x 100.5(L) mm 2.25(W) x 1.86(H) x 3.95(L) inch

Weight : 130g (0.29 lbs)

Operating Temperature : -10˚C ~ 50˚C

(14˚F ~ 122˚F)

(3)Accessories

SCREW (M4 X L15) : 3 pcs

(4)Installation

Explains the installation of CAMERA MOUNT BRACKET as wall as the installation of the camera onto the CAMERA MOUNT BRACKET.

•Choose an installation site that can sufficiently support the weight of the equipments to be installed.

•Attach the camera mount bracket to the wall using the supplied screws (M4 X L15).

Eng-