Samsung SMT-190Dx Record Event Search, Alarm Event Search, Loss Event List, Power Event List

USER'S MANUAL

3.SEARCH START

-Input [YY/MM/DD] and [HH:MM:SS] to search and press the ENTER ( ) button. And then, the related data is searched.

-Use the , , , , key to change.

7-3) RECORD EVENT SEARCH

After pressing the search button, select the record event search menu. The following screen is displayed.

			07/07/07	00:00:01
	RECORD EVENT SEARCH
	ID	EVENT	DATE	TIME
001		RECORD START	05/01/05	02:23:28
002		RECORD START	05/01/05	01:30:00
003		TIMER START	05/01/05	00:49:31

If you press the REC button among the data recorded in the HDD, the data list recorded is displayed. Select the record event list with the ,  key. Press the ENTER button to search it.

7-4) ALARM EVENT SEARCH

After pressing the search button, select the ALARM EVENT SEARCH. The following is displayed.

07/07/07 00:00:01

ALARM EVENT SEARCH

ID	EVENT	DATE	TIME
001	ALARM START	01/01/05	12:45:20
002	MOTION START	01/01/05	10:10:15

-The data recorded on the HDD due to alarm occurrence or motion is displayed by the recording time. Select the ALARM/MOTION EVENT LIST by use of the ,  key. And press the button to search it.

7-5) LOSS EVENT LIST

The information including the channel, date and time is displayed when VIDEO LOSS occurs.

			07/07/07	00:00:01
	LOSS EVENT LIST
	NO CH	MM/DD/YY	HH:MM:SS	EVENT
01.08		07/02/07	03:07:38	LOSS

It is possible to check the list of next page by use of ,

key.

7-6) POWER EVENT LIST

Displays the date and time information with the list when the power is turned on.

			07/07/07	00:00:01
	POWER EVENT LIST
	NO	MM/DD/YY	HH:MM:SS	EVENT
02		01/01/05	04:07:38	POWER
03		01/01/05	02:11:56	POWER
04		01/01/05	00:23:24	POWER

It is possible to check the list of next page by use of ,

key.

7-7) BASIC PLAYBACK

Press the PLAY/STILL button to play the data recorded in the HDD immediately.

Playback starts displaying the following screen.

	Play 07/01/05	00:00:01
CAM1	CAM2	CAM3
CAM4	CAM5	CAM6
CAM7	CAM8

If there is no data recorded, "NO DATA" message is displayed.

NO DATA

Note

-If the user is in the menu, the playback does not start even if the PLAY button is pressed. Exit from the menu first to start the playback.

-Press the stop button to stop the playback. If the PLAY/STILL button is pressed again, the system starts the playback from the last stop.

-If the final data of HDD finishes playing back, the first data of HDD is played again.

Eng-29