USER'S MANUAL

Chapter 2 :

System Components

and Installation

2-1) Requirements for installation and safety

This section describes the requirements for safe installation and use.

Install the product on a flat table or in a rack. It should be used only when level and should not be

used when standing vertically or at an acute angle. The location in which the main system is installed and the configuration of the room are very important

for proper operation of the system.

When the products are installed too closely together or the location is poorly ventilated, the system

may not operate properly and maintenance of the system may be difficult. Sufficiently circulate the

air within the system operating room and tightly fasten the cover of the main system to prevent

malfunction and reduce system downs due to environmental causes. There are high voltage parts inside. Do not open the cover.

Install the product in a place that meets the following environmental conditions. Be sure to maintain

the system under the temperatures and humidity conditions given below:

Operating temperature : 0°C ~ 40°C (32°F ~ 104°F)

Storage temperature : -20°C ~ 60°C (-4°F ~ 140°F)

Operating humidity : 20% ~ 85% RH

Storage humidity : 20% ~ 95% RH

Input voltage : AC 100V ~ 240V

Power usage : less than 85 Watts

Frequency : 60Hz/50Hz

Caution

When operating the product, the fluctuation of input voltage must be within 10% of the rated voltage and the external power outlet must be grounded, otherwise, it may cause electric shock or malfunction of the product. Do not connect heat-generating appli- ances such as a hair dryer, iron or refrigerator to the same power outlet in which the product is plugged, otherwise it may cause a fire or malfunction of the product. The use of an Automatic Voltage Regulator (AVR) is highly recommended to ensure that stable power is supplied.

Caution

SMT-190DN is fitted with a 250GB HDD and this HDD can change with a new one.

Our Company guarantees only SEAGATE 250GB ST3250820ACE as HDD.

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCRDING TO LOCAL, STATE OR DISPOSED OF OF ACCRDING TO LOCAL, STATE OR FEDERAL LAWS.

For details see lamprecycle.org, eiag.org, or call 1-800-Samsung

Eng-

Page 7
Image 7
Samsung SMT-190Dx user manual System Components Installation, Requirements for installation and safety