DSL User (PPPoE)
- Constituted by IP on PPPoE (DSL)
SMT-190DN products can be used on the network using
IPthroughPPPoE(DSL).Incaseofacongurationusing
PPPoE, SMT-190DN connection is made through the
domain names (EX : http://wff0000.websamsung.net) that
are automatically registered in Samsung's DDNS server.
You do not need to enter IP address, Subnet Mask and
Gateway in the network tab of Admin Mode.
1)Connectasinthegurebelowandturnonthepower
of each piece of equipment in the following order.
2) MOVE TO EACH item by using / key, and /
KEYchange the set value.
3) Move to ‘PPPoE...’ by using NETWORK ACCESS.
Press ENTER SWITCH to set to PPPoE.
07/07/07 00:00:01
PPPoE. ACCESS
DNS 1 168. 126. 63. 1
DNS 2 168. 126. 63. 2
USER ID *************
*************
USER PWD *************
*************
4) When accessing the PPPoE (DSL), type in the User
 NameandPassword(andConrmPassword)given
to you by the DSL Service Provider.
Caution
When using DSL (ISP-internet service provider) you
must type correct User Name and Password to
connect to SMT-190DN. If you type an incorrect User
Name or Password, communication is impossible.
ID and PASSWORD
5) USER ID and PWD (Password)are limited to 40 digits
maximum. Only numerals,@symbol and small
characters can be used.
Capital letters are not supported.
6) DNS 1 and DNS 2 will be automatically set to DNS as
shown above.
7) Use / KEY to change it.
8) After setting, move to the main screen by using the
MENU button.
9) Set values will be stored as shown below.
It takes 30 to 35 seconds.
07/07/07 00:00:01
NETWORK SETTING
07/07/07 00:00:01
CAM1
10) You can view the video source of the SMT-190DN
from a remote PC.
11) Open your Internet Explorer web browser, type in the
following in the URL window and press ENTER.
http://wff0000.websamsung.net
For example, if your SMT-190DN MAC address is
ff0001, then type in ff0001 instead of ff0000. W is
 axedletterthatmustbetypedin.Thiswillensure
connection to the monitor.
Note
MAC Address.
Locate the MAC Address of the SMT-190DN (each
SMT-190DN has its own unique MAC address)
It can be checked in “5-9) NETWORK SETUP” of
SETUP MENU’.
It is the last 6 digits as shown below.
At this time, you should add “w” in front of “mac
address”.
07/07/07 00:00:01
NETWORK SETTING
1. NETWORK ACCESS STATIC...
2. HTTP PORT 00080
3. PICTURE QUALITY NORMAL
NETWORK STATUS
IP ADDR 192.168.1.2
GATEWAY 192.168.1.65
SUBNETMASK 255.255.255.0
DNS 1 168.126.63.1
DNS 2 168.126.63.2
MAC ADDR 00:30:6f:ff:00:00
DDNS ADDR wff0000.websamsung.net
Caution
If you change the HTTP port number 80 to 1025, then
you must type in as the address bar below.
http://wff0000.websamsung.net:1025
Eng-26
USER'S MANUAL