![How to Set and Reset the Service Filter (Fan Run-Time) Alert](/images/new-backgrounds/48738/48738179x1.webp)
Carrier
How to Set and Reset the Service Filter (Fan Run-Time) Alert
This counter keeps track of the number of hours of fan
MODE | Press the MODE button. While holding | |
| the MODE, press the PROGRAM | |
PROGRAM | button to enter Setup screens. | |
MODE | Press the MODE button repeatedly | |
until this setup screen appears. | ||
|
Note: Press the MODE button momentarily to move through the setup screens. Press and hold the MODE button to move back- wards through the setup screens.
| Hours the fan has |
|
|
|
| |
| run since last reset |
| 0 | Setup | 44 | |
Press | Service Filter | |||||
| ||||||
Reset the counter to 0 to |
| |||||
remove the Service Filter |
|
|
| |||
icon from the display. |
|
|
| |||
FAN |
|
|
|
Press
MODE
Adjust the number of hours, in increments of 50, the fan will run before the Service Filter icon appears on the display. 0 = off.
|
|
|
0 | Setup | 45 |
| ||
Service Filter |
|
19
Press
(0 - 1950 hours)
PROGRAM
Press the PROGRAM button to leave the Setup screens. If no buttons are pressed, the display will leave the setup screens after 30 seconds.
Page 19.2