SECTION 20
Programming Holiday Mode
Carrier
When the thermostat is programmed for a Holiday mode, it will take effect at 12:00 am of the next day. In order for the Holiday mode to take effect the thermostat must be in the Program On mode.
The thermostat will control to the Unoccupied cooling and heating setpoints set in Section 6, pages 6.2 and 6.3.
Holiday setpoints will be enforced for the number of days specified in step #1 (0 - 99 days).
Press | Press the HOLIDAY button to enter | |
HOLIDAY | the Holiday programming setup | |
steps. | ||
|
Select the number of days that the Holiday schedule will be in effect. A value of 0 disables Holiday mode.
(0 - 99 days)
0Setup I
y
Press
HOLIDAY
Press the HOLIDAY button to exit the setup screens. If no buttons are 
pressed, the display will leave the setup screens after 30 seconds.
20
You cannot set the Heat setpoint any higher than the Cool setpoint minus the deadband setting in Advanced Setup step #22 on page 13.2.
Page 20.1
