Carrier 33CS450-01 Page, Carrier, Viewing the Remote Temperature Sensors, Note Press the MODE

Carrier

Viewing the Remote Temperature Sensors

Each sensor is programmed with a “hard-coded” address that the thermostat “scans” in order from lowest to highest. Therefore, in order to determine which sensor corresponds to the number on the setup screen you will need to disconnect each sensor from the group in order to determine which sensor number reads dashes.

MODE Press the MODE button. While holding the MODE,

PROGRAM

press the PROGRAM button to enter Setup screens.

	Press the MODE button repeatedly			Note: Press the MODE
MODE				button momentarily
	until setup step #48 appears.			to move through the
				setup screens. Press
Remote	Setup	48		and hold	the MODE
Sensor #1.	72			button to move back-
				wards through the
		Remote		setup screens.
		Remote		72	6
		i	Remote	Setup 48
		48	Sensor #6		Remote
Remote	Setup
Sensor #2	68			70	7
		Remote
		2	Remote	Setup 48
		48	Sensor #7		Remote
Remote	Setup
Sensor #3	76			73	8
		Remote
		3	Remote	Setup 48
		48	Sensor #8		Remote
Remote	Setup
Sensor #4
	80 4		PROGRAM
				Press the MODE button to
				return to normal operation.
Remote	65	48
		5
	Setup
Sensor #5
22		Remote

Page 22.4