Carrier 33CS450-01 Viewing the UV Light Run-Time, Page, Carrier, the MODE, press the PROGRAM

Carrier

Viewing the UV Light Run-Time

After the UV light has been operating for the number of days set in step #18 below, the Service UV Light icon will appear. This counter keeps track of the number of days since the UV light icon was last reset.

MODE	Press the MODE button. While holding
	the MODE, press the PROGRAM
PROGRAM	button to enter Setup screens.
MODE	Press the MODE button repeatedly
	until this setup screen appears.

Note: Press the MODE button momentarily to move through the setup screens. Press and hold the MODE button to move back- wards through the setup screens.

Press

FAN

Counts the number of days since the UV Light was last reset. Press FAN to reset the Service UV Light counter and remove the icon from the display.

0	Setup	I8
Service

UV Light

11

Press

PROGRAM

Press the PROGRAM button to leave the Setup screens. If no buttons are pressed, the display will leave the setup screens after 30 seconds.

Page 11.6