Carrier 33CS450-01 Time-Based Control of the Programmable Output, I888, Page, Carrier, Time =

Carrier

Time-Based Control of the

Programmable Output

To operate one of the MISC outputs using time-based operation, set Advanced Setup step #30 (below) for Time i8:88. This extra output

will supply 24VAC to the selected MISC terminal, which is especially useful for devices that require a start and stop time. Refer to page 14.4 - 14.5 for more details on programming this output.

Possible TIME scenarios:

1)An exterior lighting system that needs to be energized every day between the hours of 8pm and 1am.

2)A sprinkler system that needs to be energized every day between the hours of 2am and 4am.

MODE

PROGRAM

MODE

Press the MODE button. While holding the MODE, press the PROGRAM button to enter Setup screens.

Press the MODE button repeatedly until this setup screen appears.

Note: Press the MODE button momentarily to move through the setup screens. Press and hold the MODE button to move back- wards through the setup screens.

14

OFF	Time = I8:88	Temp = 88	Aux
			I8:88	Setup	30
	Press the UP button to
	set the programmable
	output for time based
	operation. The digits in the
	clock area will appear.
					Continued on
					the next page

Press

MODE

Page 14.3