Samsung SMT-190Dx Temperature -10˚C ~ 50˚C14˚F ~ 122˚F Humidity Below 90%, Standard Composition

USER'S MANUAL

Keep personnel away from the installation location because there is a risk of object falling during installation.

Install SOC-N120 in a cool place where there is no direct sunlight.

Do not expose SOC-N120 to direct sunlight during operation or storage.

SOC-N120 should always be used in a place where certain temperature and humidity can be maintained (as specified below).

-Temperature: -10˚C ~ 50˚C(14˚F ~ 122˚F)

-Humidity: Below 90%

3)Installation

1.Make sure the installation location is a place where it can tolerate 5 times of the total weight of the camera before installing.

2.Connect the cable below the camera after attaching the provided Mount Bracket to the desired place.

3.Use the handle on the Mount Bracket to adjust the direction you want to setup for monitoring.

SOC-N120

SOC-N120 Pin Configuration

1	SP-
2	VIDEO_OUT
3	GND
4	SP+
5	ALM/AUDIO
6	VDD

4)Standard Composition

a.Lens

It has a focal length of 3.8mm and makes it possible to observe a relatively wide area.

b.Illumination Sensor

Detects incoming light to control the IR LED.

c.IR LED

This is an infrared LED that is controlled by the illumination sensor.

d.Camera fitting groove

Enables the camera to be fixed onto the bracket. You may install it either above or below the camera if necessary.

e.Speaker

Used to connect the sensor to the camera.

f.SENSOR jack

It outputs the sound signal which was transfered from alarm sensor.

g.Microphone

Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor.

h.6-pin modular jack

Used to connect the camera to the monitor or DVR.

Eng-11