Samsung SMT-190Dx user manual  System ID 0 ~9,  Reset Image, Color VGA mode only

USER'S MANUAL

System ID : 0 ~9

System ID

0

1

2

3

4

5

6

7

Move Enter Return

1.Press the MENU and / button to select the Setup menu.

2.Press the ENTER or  button.

3.Press the / and ENTER button to select the System ID.

4.Press the / and ENTER button to select the setting you want. (0~9)

5.Press the MENU or  button repeatedly to exit.

Note

You must set the same SYSTEM ID of the DVR menu and LCD menu to use system ID function.

and set the same SYSTEM ID for the remote controller too. If the SYSTEM ID of the DVR menu is differ from the LCD menu's, the remote controller may not operate properly. Set the SYSTEM ID of the LCD menu at LCD menu > Setup Menu > System ID. Press the number button that you want on the remote controller while SYSTEM ID button is pressed for setting the SYSTEM ID of the remote controller.

Reset : Image, Color - VGA mode only

			Setup
	Language	: English	
	Transparancy : Medium		
	System ID	: 0	
	Reset		
Move		Enter	Exit

Reset

Image Reset

Color Reset

Move Enter Return

If you didn't select VGA input, this menu is not available.

1.Press the MENU and / button to select the Setup menu.

2.Press the ENTER or  button.

3.Press the / and ENTER button to select the Reset.

4.Press the / and ENTER button to select the setting you want.

Image Reset

OKCancel

Move Enter Return

5.Press the / and ENTER button to selelct the OK or Cancel.

6.Press the MENU or  button repeatedly to exit.

Eng-53