USER'S MANUAL
Eng-49
If you select the Brightness, then the picture below
appears on the screen.
Brightness
80
Color Tone
DVR mode : Cool2, Cool1, Normal, Warm1,
Warm2
Tint feature is enabled while input signal is NTSC
mode.
Color Tone
Cool2
Cool1
Normal
Warm1
Warm2
Move Enter Return
<Video mode>
1. Press the MENU and / button to select the
Picture menu.
2. Press the ENTER button.
3. Press the / and ENTER button button to select
the Color Tone menu.
4. Press the / button to select the setting you
want.
5. Press the MENU or button repeatedly to exit.
Under Scan : Over, Under
Picture
Move Enter Exit
Mode : Movie
Custom
Color Tone : Warm2
Under Scan : Under
NR : On
Under Scan
Move Enter Return
Over
Under
1. Press the MENU and / button to select the
Picture menu.
2. Press the ENTER or button.
3. Press the / button to select the Under Scan
menu.
4. Press the ENTER or button.
5. Press the / button to select the scan mode you
want.
6. Press the MENU or button repeatedly to exit.
You can't see the edge of the screen in the Over scan
mode. but you can see the whole screen in the Under
scan mode.
NR(Noise Reduction) : On, Off
Picture
Move Enter Exit
Mode : Movie
Custom
Color Tone : Warm2
Under Scan : Under
NR : On
If you didn't select DVR input, this menu is not available.
1. Press the MENU and ENTER button.
2.Pressthe▼/▲andENTERbuttontoselecttheNR
menu.
3. Press the ENTER or button to see sub menu.
4.Pressthe▼/▲andENTERbuttontoselecttheOff
or On.
5. Press the MENU or button repeatedly to exit.