Samsung SMT-190Dx user manual External terminal connecting Method for Camera and Monitor, Eng-12

USER'S MANUAL

2-5) External terminal connecting

method for Camera and Monitor

Total System Configuration

1) External terminal connecting method for
CAMERA
	Camera alarm injack
Sensor	Sensor
input
PIR Sensor		MONITOR
		SMT-190DN

• An additional PIR sensor or external sensor can also be connected.

• The additional PIR sensor can be connected as shown in the above graphic.

• Sensor’s trigger signal is NO (Normal Open).

• Sensor is not supplied. (Sold separately)

2) ALARM terminal connecting method.  Local System Configuration

MONITOR

SMT-190DN

<SMT-190DN> <External Recorder>

a.Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of the VCR.

b.Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of the VCR.

c.Connect the A/R terminal on the rear panel to the Alarm Reset terminal of the VCR.

d.Connect the G (ground) terminal on the rear panel to the Ground terminal of the VCR.

MONITOR

SMT-190DN

Eng-12