Samsung SMT-190Dx user manual Rear, Eng-16

USER'S MANUAL

■ Rear

Rear

Video Input (BNC)

Video Input (RJ-11)

Audio In

Caution

Do not connect the Video In (BNC Input) and the RJ-11 (DIY Camera) input with the same channel at the same time. Do not connect the Audio In(RCA Input) and the RJ-11(DIY Camera) input with the same channel at the same time. If connecting them simultaneously, two input signals may be mixed when outputting. This is not the product defect; so, please connect only one between the two inputs.

Symptom:

When 2 video signals are input simultaneously, the pictures overlap on the screen. At this time, noise appears next to CH when the user enters each of the menus by pressing the MENU or SEARCH key. In this case, although the noise disappears when the user exits the menu, it reappears when the user reenters the menu. Countermeasure:

Remove one of the video signal inputs causing the problem and press the M.SCREEN key. Then the noise that appeared next to CH in the MENU or SEARCH window disappears.

Names	Function
Video Input( RJ11)	Connector linked to the Port DIY CAMERA(SOC-C120, SOC-N120).
CH1 ~ CH8
Video Input(BNC)	Composite video signal input connector (BNC Style Connector).
CH1 ~ CH8
NETWORK	Connector for LAN cable connection.
Video Out	Video signal output connector (RCA Jack)
Audio out	Audio signal output connector (RCA Jack)
VGA In	VGA signal input.
HOT	Alarm output connector. Sends alarm signals to external devices.
COLD	Connect to the ground terminal of the external devices.
A/R	Alarm reset connector. Sends alarm reset signal to external devices.
GND	Connect to the ground terminal of the external devices.
Audio In	Audio Input signal connector from CH1 to CH4.(RCA Jack).

Eng-16