USER'S MANUAL

07/07/07 00:00:01

07/07/07 00:00:01

NETWORK SETTING

CAM1

4)Open your Internet Explorer web browser.

Using a Static (fixed) IP, You may also connect remotely by typing in the IP address of the SMT- 190DN, Such as

http://192.168.1.200

Note

HTTP Port

Set the port to be used when connecting to SMT-190DN in Internet Explorer and receive the necessary files for image transmission.

The port setting is used for various network configura- tions or a particular port etc.

Caution

A port number is reserved for TCP port and HTTP port setting. Default values should not be changed. However, if the IP Router is used in a network environment, input proper values with reference to the IP Router manual.

If the SMT-190DN is using a Router, you may also connect remotely by typing In the WAN IP Address of the Router and the HTTP port assigned to the SMT-190DN. (here you must type in the port address even if it is the default “80”), such as

http://192.168.1.200:80

1)Move to ‘DHCP...’ by using /KEY in NETWORK ACCESS, then press ENTERSWITCH to set to DHCP.

 

07/07/07

00:00:01

DHCP ACCESS

 

 

DNS 1

168.126.63.1

DNS 2

168.126.63.2

 

 

 

3)After setting, move to the main screen by using the MENU button.

4)Set values will be stored as shown below. It takes 30 to 35 seconds.

07/07/07 00:00:01

07/07/07 00:00:01

NETWORK SETTING

CAM1

5)You can view the video source of the SMT-190DN from a remote location PC.

6)Open your Internet Explorer web browser, type in the following in the URL window and press Enter. http://wff0000.websamsung.net

Where ff0000 is the MAC address of your SMT-190DN in this example. If your SMT-190DN MAC address is ff0001, then type in ff0001 instead of ff0000.

Note

MAC Address.

Locate the MAC Address of the SMT-190DN(each

SMT-190DNhas its own unique MAC address) It can be checked in “5-9) NETWORK SETUP” of

SETUP MENU’. It is the last 6 digits as shown below.

 

07/07/07

00:00:01

NETWORK SETTING

 

 

1. NETWORK ACCESS

STATIC...

2. HTTP PORT

00080

 

3. PICTURE QUALITY

NORMAL

NETWORK STATUS

 

 

IP ADDR

192.168.1.2

GATEWAY

192.168.1.65

SUBNETMASK

255.255.255.0

DNS 1

168.126.63.1

DNS 2

168.126.63.2

MAC ADDR

00:30:6f:ff:00:00

DDNS ADDR wff0000.websamsung.net

Caution

If you change the HTTP port number 80 to 1025, then you must type in as the address bar below. The de- fault port number is 80. You may need to change the port number if you cannot link to the security system from a remote location due to a firewall or if you have other issues. http://wff0000.websamsung.net:1025

2)DNS 1 and DNS 2 will be automatically set to DNS as shown above. Use /KEY to change it.

At this time, you should add “w” in front of “mac address”.

Eng-25

Page 25
Image 25
Samsung SMT-190Dx user manual Http//192.168.1.20080,  At this time, you should add w in front of mac address, Eng-25