3.4 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.
| BIOS SETUP UTILITY |
|
|
| |||
Main | Advanced | H/W Monitor | Boot |
| Security | Exit | |
Hardware Health Event Monitoring |
| Target Fan Speed |
| ||||
|
|
|
| ||||
|
|
|
|
| Fast |
|
|
CPU Temperature |
| : 37 C / 98 F |
| Middle |
| ||
M / B Temperature |
| : 31 C / 87 F |
| Slow |
|
| |
CPU Fan Speed |
| : 3400 RPM |
|
|
|
| |
Chassis Fan Speed |
| : N / A |
|
|
|
| |
Vcore |
|
| : 1.629V |
|
|
|
|
+ 3.30V |
|
| : 3.306V |
|
|
|
|
+ 5.00V |
|
| : 5.067V |
|
| Select Screen |
|
+ 12.00V |
| : 11.890V |
|
|
| ||
|
|
| Select Item |
| |||
|
|
|
|
|
|
| |
|
|
|
|
| F1 | General Help |
|
CPU Quiet Fan |
| [Enabled] |
| F9 | Load Defaults |
| |
Target CPU Temperature ( | C) | [50] |
| F10 | Save and Exit |
| |
Tolerance ( C) |
| [02] |
| ESC | Exit |
| |
Target Fan Speed |
| [Fast] |
|
|
|
| |
| v02.54 (C) Copyright |
| |||||
CPU Quiet Fan
This item allows you to identify the temperature of CPU fan. If you set this option as [Disabled], the CPU fan will operate in full speed. If you set this option as [Enabled], you will find the items “Target CPU Temperature
(
C)”, “Tolerance (
C)”, and “Minimun Fan Speed” appear to allow you adjusting them. The default value is [Disabled]. You are allowed to enable this function only when you install
Target CPU Temperature ( C)
The target temperature will be between 45 C and 65 C. The default value is [50].
Tolerance ( C)
The default value of tolerance is [2], which means the error of the target CPU temperature will be within 2 C.
Target Fan Speed
Use this option to set the target fan speed. You can freely adjust the target fan speed according to the target CPU temperature that you choose. The default value is [Fast]. Configuration options: [Fast], [Middle] and [Slow].
3 8
