3.3.6 Floppy Configuration
In this section, you may configure the type of your floppy drive.
BIOS SETUP UTILITY
Advanced
Floppy Configuration
Floppy A | [1.44 MB 312"] |
Floppy B | [Disabled] |
Select the type of floppy drive connected to the system.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit ESC Exit
v02.54 (C) Copyright
3.3.7 Super IO Configuration
BIOS SETUP UTILITY
Advanced
Configure Super IO Chipset
OnBoard Floppy Controller | [Enabled] |
Serial Port Address | [3F8 / IRQ4] |
Infrared Port Address | [Disabled] |
Parallel Port Address | [378] |
Parallel Port Mode | [ECP + EPP] |
EPP Version | [1.9] |
ECP Mode DMA Channel | [DMA3] |
Parallel Port IRQ | [IRQ7] |
OnBoard Game Port | [Enabled] |
OnBoard MIDI Port | [Disabled] |
Allow BIOS to Enable or Disable Floppy Controller.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit ESC Exit
v02.54 (C) Copyright
OnBoard Floppy Controller
Use this item to enable or disable floppy drive controller.
Serial Port Address
Use this item to set the address for the onboard serial port or disable it. Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4], [2E8 / IRQ3].
Infrared Port Address
Use this item to set the address for the onboard infrared port or disable it. Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3].
2 9
