3.3.8 USB Configuration
BIOS SETUP UTILITY
Advanced
USB Configuration
USB Devices Enabled :
None |
|
USB Controller | [Enabled] |
USB 2.0 Support | [Enabled] |
Legacy USB Support | [Disabled] |
To enable or disable the onboard USB controllers.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit ESC Exit
v02.54 (C) Copyright
USB Controller
Use this item to enable or disable the use of USB controller.
USB 2.0 Support
Use this item to enable or disable the USB 2.0 support.
Legacy USB Support
Use this item to enable or disable the support to emulate legacy I/O devices such as mouse, keyboard,... etc. Or you may select [Auto] so that the system will start to
3.4 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.
| BIOS SETUP UTILITY |
|
| ||
Main | Advanced | H/W Monitor | Boot | Security | Exit |
Hardware Health Event Monitoring |
|
|
| ||
CPU Temperature | : 37 C / 98 F |
|
|
| |
M / B Temperature | : 31 C / 87 F |
|
|
| |
CPU Fan Speed | : 2463 RPM |
|
|
| |
Chassis Fan Speed | : N / A |
|
|
| |
Vcore |
| : 1.629V |
|
|
|
+ 3.30V |
| : 3.306V |
|
|
|
+ 5.00V |
| : 5.067V |
| Select | Screen |
+ 12.00V | : 11.890V |
| |||
| Select Item | ||||
|
|
|
| ||
|
|
| F1 | General Help | |
|
|
| F9 | Load Defaults | |
|
|
| F10 Save and Exit | ||
|
|
| ESC | Exit |
|
| v02.54 (C) Copyright | ||||
3 1
