| Audio Jack: Side Speaker / Rear Speaker / Central/Bass / |
| Line In / Front Speaker / Microphone |
| (see CAUTION 7) |
BIOS: | AMI legal BIOS, |
| Supports “Plug and Play”, |
| ACPI 1.1 compliance wake up events, |
| Supports jumperfree, |
| CPU frequency stepless control |
| (only for advanced users’ reference, see CAUTION 8) |
OS: | Microsoft® Windows® 98 SE / ME / 2000 / XP compliant |
CAUTION!
1.About the setting of “Hyper Threading Technology”, please check page 23.
2.Please check the table below for the memory support frequency and its corresponding CPU FSB frequency.
CPU FSB Frequency | Memory Support Frequency |
800 | DDR266, DDR320*, DDR400 |
533 | DDR266, DDR333 |
400DDR266
*When you use an
3.This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 12 for proper installation.
4.While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.
5.Do NOT use a 3.3V AGP card on the AGP slot of this motherboard! It may cause permanent damage!
6.Power Management for USB 2.0 works fine under Microsoft® Windows® XP SP1 / 2000 SP4. It may not work properly under Microsoft® Windows® 98/ ME.
7.For microphone input, this motherboard supports both stereo and mono modes. For audio output, this motherboard supports
8.Although this motherboard offers stepless control, it is not recommended to perform
7
