ASRock P67 Pro manual Onboard Headers and Connectors, FDD connector, Serial Ataii Connectors

2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

FDD connector

(33-pin FLOPPY1)

(see p.2 No. 25)

the red-striped side to Pin1

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector.

Serial ATAII Connectors

(SATA2_2: see p.2,		No. 10)	SATA2_4	SATA2_2
(SATA2_3: see	p.2,	No. 16)
(SATA2_4: see	p.2,	No. 9)
(SATA2_5: see p.2,		No. 19)	SATA2_5	SATA2_3

These four Serial ATAII (SATAII) connectors support SATA data cables for internal storage devices. The current SATAII interface allows up to 3.0 Gb/s data transfer rate.

Serial ATA3 Connectors

(SATA3_0: see	p.2, No. 11)	SATA3_0
(SATA3_1: see	p.2, No. 12)

SATA3_1

These two Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.

Serial ATA (SATA)	Either end of the SATA data
Data Cable	cable can be connected to the
(Optional)	SATA / SATAII / SATA3 hard
	disk or the SATAII / SATA3
	connector on this motherboard.

English

18

ASRock P67 Pro Motherboard