ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is [Disabled]. Please set this option to [Enabled] if you plan to use this motherboard to submit Windows® VistaTM certification.
3.3.4 IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
ATA/IDE Configuration | [Enhanced] |
SATAII 1 | [Hard Disk] |
SATAII 2 | [Not Detected] |
SATAII 3 | [Not Detected] |
SATAII 4 | [Not Detected] |
IDE1 Master | [Not Detected] |
IDE2 Slave | [Not Detected] |
Set [Compatible] when Legacy OS
Set [Enhanced] when Native OS (Win 2000/XP) is used.
| Select Screen |
| Select Item |
+- | Change Option |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows® NT). If native OS (Windows® 2000 / XP) is installed, please select [Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA 3, IDE 1], then SATAII_2 and SATAII_4 will not work. Likewise, if it is set to [IDE 1, SATA 2, SATA 4], then SATAII_1 and SATAII_3 will not work.
Because Intel® ICH7 south bridge only supports four IDE devices under legacy OS (Windows® NT), you have to choose [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4] when the installed device is used with legacy OS.
| [SATA 1, SATA 2, | [SATA 1, SATA 3, | [IDE 1, SATA 2, | |
| SATA 3, SATA 4] | IDE 1] | SATA 4] | |
Master | SATAII_1, | SATAII_1 | SATAII_2 | |
SATAII_2 | ||||
|
|
| ||
|
|
|
| |
Slave | SATAII_3, | SATAII_3 | SATAII_4 | |
SATAII_4 | ||||
|
|
|
33
