3.3.6 Floppy Configuration
In this section, you may configure the type of your floppy drive.
| BIOS SETUP UTILITY |
|
|
Advanced |
|
|
|
Floppy Configuration |
| Select the type of | |
|
| floppy drive | |
Floppy A | [1.44 MB 312"] | connected to the | |
|
| system. | |
|
|
| Select Screen |
|
|
| Select Item |
|
| +- | Change Option |
|
| F1 | General Help |
|
| F9 | Load Defaults |
|
| F10 | Save and Exit |
|
| ESC | Exit |
v02.54 (C) Copyright | |||
3.3.7 Super IO Configuration
BIOS SETUP UTILITY |
|
| |
Advanced |
|
|
|
Configure Super IO Chipset |
| Allow BIOS to Enable | |
|
| or Disable Floppy | |
OnBoard Floppy Controller | [Enabled] | Controller. | |
|
| ||
Serial Port Address | [3F8 / IRQ4] |
|
|
Infrared Port Address | [Disabled] |
|
|
Parallel Port Address | [378] |
|
|
Parallel Port Mode | [ECP + EPP] |
|
|
EPP Version | [1.9] |
|
|
ECP Mode DMA Channel | [DMA3] |
|
|
Parallel Port IRQ | [IRQ7] |
|
|
|
|
| Select Screen |
|
|
| Select Item |
|
| +- | Change Option |
|
| F1 | General Help |
|
| F9 | Load Defaults |
|
| F10 | Save and Exit |
|
| ESC | Exit |
v02.54 (C) Copyright | |||
OnBoard Floppy Controller
Use this item to enable or disable floppy drive controller.
Serial Port Address
Use this item to set the address for the onboard serial port or disable it. Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4], [2E8 / IRQ3].
Infrared Port Address
Use this item to set the address for the onboard infrared port or disable it. Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3]. If you plan to use ASRock DeskExpress on this motherboard, please keep this item on [Disabled] option.
36
