Using SATA / SATAII / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY 
Advanced screen 
Storage Configuration. B. Set the option “SATA Mode” to [IDE]. (For SATAII_0 to SATAII_3, SATA3_0 and
SATA3_1 ports.)
Set the option “ASMedia SATA3 Operation Mode” to [IDE]. (For SATA3_A0 port.)
STEP 2: Install Windows® 7 / 7
2.24 Untied Overclocking Technology
This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you enable Untied Overclocking function, please enter “Overclock Mode” option of UEFI setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment.
Please refer to the warning on page 9 for the possible overclocking risk before you apply Untied Overclocking Technology.
48
