ODT WR (CH B)
Use this item to change ODT WR (CH B) Auto/60/120 setting. The default is [Auto].
ODT NOM (CH B)
Use this item to change ODT NOM (CH B) Auto/20/30/40/60/120 setting. The default is [Auto].
ODT WR (CH C)
Use this item to change ODT WR (CH C) Auto/60/120 setting. The default is [Auto].
ODT NOM (CH C)
Use this item to change ODT NOM (CH C) Auto/20/30/40/60/120 setting. The default is [Auto].
ODT WR (CH D)
Use this item to change ODT WR (CH D) Auto/60/120 setting. The default is [Auto].
ODT NOM (CH D)
Use this item to change ODT NOM (CH DA) Auto/20/30/40/60/120 setting The default is [Auto].
Enforce POR
Use this item to configure Enforce POR. The default value is [Auto].
DRAM RAPL baselone
Use this item to configure DRAM RAPL baselone. The default value is [Auto].
Phase Shedding
Use this item to configure Phase Shedding. The default value is [Auto].
Electrical Throttling
Use this item to configure Electrical Throttling. The default value is [Auto].
Memory Power Savings Mode
Use this item to configure Memory Power Savings Mode. The default value is [Auto].
CKE Throttling
Use this item to configure CKE Throttling. The default value is [Auto].
Memory Test
Use this item to configure Memory Test. The default value is [Auto].
Memory Test When Fast Boot
Use this item to configure Memory Test When Fast Boot. The default value is [Auto].
Memory Fast Boot
Use this item to adjust DDR fast boot mode. The default value is [Auto].
54
