![](/images/new-backgrounds/1214792/21479273x1.webp)
2.10 ASRock Smart Remote Installation Guide
ASRock Smart Remote is only used for ASRock motherboard with CIR header. Please refer to below procedures for the quick installation and usage of ASRock Smart Remote.
Step1. Find the CIR header located next to the USB 2.0 header on ASRock motherboard.
Step2. Connect the front USB cable to the USB 2.0 header (as below, pin
USB 2.0 header
CIR header
USB_PWR
P-
P+
GND DUMMY
1 2 3 4 5
GND
IRTX
IRRX
ATX+5VSB
Step3. | Install |
Step4. | Boot up your system. Press <F2> or <Del> to enter BIOS Setup Utility. |
| Make sure the option "CIR Controller" is setting at [Enabled]. |
| (Advanced |
|
|
| If you cannot find this option, please shut down your system and install |
| |
|
|
Step5. | Enter Windows. Execute ASRock support CD and install CIR Driver. (It is |
| listed at the bottom of driver list.) |
37