ASRock Z87 Extreme6 manual English

Power LED Header (3-pin PLED1)

(see p.11 or p.12, No. 16)

Serial ATA3 Connectors (SATA3_0_1:

see p.11 or p.12, No. 11) (SATA3_2_3:

see p.11 or p.12, No. 12) (SATA3_4_5:

see p.11 or p.12, No. 13) (SATA3_A1_A2:

see p.11 or p.12, No. 10) (SATA3_A3_A4:

see p.11 or p.12, No. 9)

Z87 Extreme6/ac / Z87 Extreme6

1			Please connect the chassis
		PLED+	power LED to this header
		PLED-
	PLED+		to indicate the system’s
			power status.
A4			These ten SATA3
A3_			connectors support SATA
_			data cables for internal
SATA3
			storage devices with up
A1 A2			to 6.0 Gb/s data transfer
			rate. If the eSATA port
_			on the rear I/O has been
SATA3
			connected, the internal
1			SATA3_A4 will not
0_			function.
SATA3			To minimize the boot
			time, use Intel® Z87 SATA
3			ports (SATA3_0) for your
2_			bootable devices.
SATA3
SATA3 4 5

USB 2.0 Headers

(9-pin USB2_3)

(see p.11 or p.12, No. 23) (9-pin USB4_5)

(see p.11 or p.12, No. 24)

(USB6)

USB_PWR

P- P+ GND DUMMY

1

GND

USBP_-PWRP+

Besides four USB 2.0 ports on the I/O panel, there are three headers and one port on this motherboard. Each USB 2.0 header can support two ports.

(see p.11 or p.12, No. 22)

English

29