4.Installing software
4.1Installing the card driver
Ensure that you have installed the VGA card driver before installing the Xonar HDAV driver. Otherwise, driver installation error may occur.
1.After you have installed the Xonar HDAV card, turn on your computer.
Windows® automatically detects the HDAV card and searches for device drivers. When prompted for the drivers, click Cancel.
2.Insert the support CD into the optical drive. If Autorun is enabled in your system, the setup starts automatically. If not, run setup.exe from your support CD.
3.The installation program will remind you to make sure you have connected the additional power cable from your power supply unit to the card. If the power cable is not connected properly, the card will not work at all. If it has not been done, turn off the computer to install the power cable before you go on the installation process.
4.Follow the instructions on the screen to complete the installation. Read the “END USER LICENCE AGREEMENT” in the process and make sure you understand and accept it before you continue the installation. When the installation finishes, you may be prompted to restart your computer. You can choose to restart the computer later if desired.
ASUS Xonar HDAV 1.3 | 11 |