6Monitoring button Click this button to monitor and loopback recording audio to outputs (PC speakers). Therefore, the recording volume will influence the monitoring signals from speaker outputs. The audio will be mixed into the streams you are playing out from your PC and all DSP effects will be applied to the source, too. A typical benefit is to apply Dolby Pro-Logic IIx 7.1-ch spreading for your TV audio, CD, MP3, or stereo game console audio from Wii, Xbox, PS2/PS3/PSP, etc. To apply Dolby Virtual Speaker is suitable for two-speaker environment.

 

 

NOTE: When the monitoring function is enabled, audio

 

 

output from HDMI output is disabled.

7

Source / path name

This shows the source name for each volume control slider,

 

 

including:

 

 

 

S/PDIF-In: S/PDIF digital input source

 

 

Mix: Stereo Mix which will record all analog inputs and digital

 

 

wave audio you are playing on PC

 

 

Aux: recording from Aux-In for typically TV-tuner card audio

 

 

or other sound sources

 

 

Line-In: recording from Line-in jack for external audio devices

 

 

WAVE: recording from digital wave audio you are playing on

 

 

PC (Note: Windows Vista doesn’t support WAVE recording.)

8

Microphone-In

 

 

 

advanced setting

Click this button

to open the advanced settings for the

 

 

Microphone-In:

 

 

 

Enabling “Microphone Boost” will increase a volume gain

 

 

to boost microphone input signals. If you connect your

 

 

microphone to the front panel audio module, enable “Front

 

 

Panel Microphone”. For typical low-cost PC microphone, it’s

 

 

recommended to enable this function.

9

Reset

Click to reset all volume controls to the default settings.

40

ASUS Xonar HDAV 1.3