Riser Modem

APPENDIX .7

7.APPENDIX

7.3.4Software Setup in Windows 98

The Modem Riser supports the Plug and Play feature. It allows your computer to automatically set the optimal configurations for the MR and communication soft- ware. Follow the procedure below to install the modem driver.

1.Power ON the computer after the hard- ware installation is completed.

2.Windows 98 will automatically detect the modem and display a “PCI Card” mes- sage under “Add New Hardware Found”.

3.Select Search for the best driver for your device and click Next.

4.Insert the Support CD that came with your motherboard into your CD-ROM drive. Enter the path E:\Modem\Win98 (assuming that your CD-ROM drive is drive E:) for the MR driver.

5.After the driver is located, click Next and then click Finish.

6.Restart your computer. Double click the modem icon at the bottom-right corner of the window.

7.Click the Settings tab. Select your coun- try and language. Click OK.

9.Click Start, point to Settings, click Control Panel, double click Modems, click the General tab, and click Motorala SM56 AC-L Modem.

10.Click Diagnostic and then click the designated COM port as shown.

11.Click More Info.... If the computer sys- tem successfully communicates with the modem, responses will be displayed as shown.

120

ASUS MEW-L User’s Manual