4. BIOS SETUP
UART2 Use Standard Infrared [Disabled]When enabled, this field activates the onboard standard infrared feature and sets the second serial UART to support the infrared module connector on the motherboard. If your system already has a second serial port connected to the onboard COM2 connector, it will no longer work if you enable the infrared feature. See
This field sets the address of the onboard parallel port connector. If you disable this feature, Parallel Port Mode and ECP DMA Select configurations will not be available. Configuration options: [Disabled] [378H/IRQ7] [278H/IRQ5]
Parallel Port Mode [ECP+EPP]This field allows you to set the operation mode of the parallel port. [Nor- mal] allows
This field allows you to configure the parallel port DMA channel for the selected ECP mode. This selection is available only if you select [ECP] or [ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3] [Disabled]
Onboard Game PortThis field sets the address of the onboard game port connector. Configuration options: [Disabled]
This field sets the address of the onboard MIDI connector. Configuration options: [Disabled]
This field is not available if you select [Disabled] in Onboard MIDI I/O. Configuration options: [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
Onboard CIR I/O [Disabled]This field sets the address of the onboard Consumer IR connector. Configuration options: [Disabled]
This field is not available if you select [Disabled] in Onboard CIR I/O. Configuration options: [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
I/O Device Config
4. BIOS SETUP
ASUS | 63 |