4. BIOS SETUP
SDRAM Cycle Time (Tras, Trc) [5T, 7T]This feature controls the number of SDRAM clocks used per access cycle. Configuration options: [5T, 7T] [6T, 8T]
SDRAM Address Setup Time [1T Delay]Configuration options: [No Delay] [1T Delay]
SDRAM Page Closing Policy [All Banks]This feature controls whether the graphic and memory controller hub will precharge one or all banks after a page miss. Configuration options: [One Bank] [All Banks]
CPU Latency Timer [Enabled]Configuration options: [Disabled] [Enabled]
Onboard VGA [Enabled]Leave on default setting if you want to use the onboard VGA. If this field is disabled, all Display Cache configurations will not be available. Configuration options: [Disabled] [Enabled]
Graphics Window Size [64MB]This feature allows you to select the size of mapped memory for AGP graphic data. Configuration options: [64MB] [32MB]
Memory Hole AtThis field allows you to reserve an address space for ISA expansion cards that require it. Configuration options: [Disabled] [Enabled]
PCI 2.1 Support [Enabled]This function allows you to enable or disable PCI 2.1 features including passive release and delayed transaction. Configuration options: [Disabled] [Enabled]
High Priority PCI Mode [Enabled]This field allows you to give PCI slot 1 a higher priority. You may want to leave on the default setting if you are using an
You can select to enable the primary IDE channel, secondary IDE channel, both, or disable both channels. Configuration options: [Both] [Primary] [Sec- ondary] [Disabled]
Onboard ISA Bridge [Enabled]If you are not using any ISA cards, you may disable this field. When this field is disabled, the
Leave on default setting.
Chip Configuration
4. BIOS SETUP
ASUS | 61 |