Asus 810 19)Serial Port COM 2 Header (10-1pin COM2)

.3

H/WConnectors

SETUP

3.HARDWARE SETUP

18)Standard IR (SIR) (5-pin) and Consumer IR (CIR) (5-1 pin) Connectors This connector supports an optional wireless transmitting and receiving infra- red module. This module mounts to a small opening on system cases that sup- port this feature. You must also configure the setting through UART2 Use In- frared (see 4.4.2 I/O Device Configuration) to select whether UART2 is di- rected for use with COM2 or IrDA. Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard’s SIR connector according to the pin definitions. An optional consumer infrared (CIR) set con- nects to the CIR and SIR connectors simultaneously for both wireless transmit- ting and remote control functions through one external infrared module. Wake On PS2 KB/Mouse in 4.5.1 Power Up Control must be Enabled in order to use Consumer Infrared (CIR) power up.

		Standard Infrared (SIR)
CIR	SIR	Front View	Back View
(NC)	+5V
GND	(NC)
	IRRX
CIRRX	GND
CIR+5V	IRTX
MEW-L			IRTX	+5V
			GND	(NC)
			IRRX

MEW-L Infrared Module Connector

19)Serial Port COM 2 Header (10-1 pin COM2)

The optional serial port bracket can be used to add an additional serial port for a second serial device. The connector with bracket shown here is for the non- LCD model.

to COM2 Header

Pin 1

MEW-L

MEW-L Serial COM2 Bracket

38 ASUS MEW-L User’s Manual