3.HARDWARE SETUP

5)Audio Port Connectors (Three 1/8” GAME_AUDIO) (optional)

Line Out (lime) can be connected to headphones or preferably powered speak- ers. Line In (light blue) allows tape players or other audio sources to be re- corded by your computer or played through the Line Out (lime). Mic (pink) allows microphones to be connected for inputting voice.

NOTE: (Only on model with onboard PCI audio) To set up a four speaker system, connect rear side speakers to the Line In connector and enable the C- Media 4-speaker function (see 6.4.2 Enabling 4-Speaker Function).

Line Out Line In Mic

1/8" Stereo Audio Connectors

6)Floppy Disk Drive Connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connect- ing the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta- tion when using ribbon cables with pin 5 plugged).

3. H/W SETUP

Connectors

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1

PIN 1

A7M266-D

A7M266-D Floppy Disk Drive Connector

ASUS A7M266-D User’s Manual

29